论文arXiv 2611.175756 天前
欠驱动双摆机器人沿非线性模态自然起摆控制算法验证
本文由 AI 根据公开内容整理,可能有误,请以原文为准:Natural Swing-Up of an Underpowered Double Pendulum(arXiv 2611.17575)
核心内容
研究团队针对电机输出仅达肩部重力扭矩6%的极端欠驱动直驱平面双连杆机器人,提出一种顺应系统自然动力学的起摆控制策略。该方法利用二维不变流形即非线性正则模态(NNMs)作为运动基准,解决了在非严格模态下能量注入与状态稳定争夺有限扭矩的工程难题,并在物理样机上成功验证了沿两种模态的自然起摆能力。
技术方案将输入扭矩解耦为不改变能量的转向分量与标量泵送分量,构建以最大化泵送为目标、受扭矩限幅及单个控制Lyapunov约束限制的线性规划问题。该约束基于模型误差变化率,完全摒弃传统稳定反馈增益设计。硬件实验表明,该分配策略在起摆性能上显著优于传统的求和截断法及优先级稳定化方法,为弱电机机器人提供了高效控制范式。
关键看点
- 极端欠驱动指标:直驱双连杆机器人电机峰值扭矩仅为肩部重力扭矩的6%,必须依赖自然动力学而非高增益对抗完成起摆任务。
- 扭矩解耦机制:将控制输入分解为功率中性转向分量与标量能量泵送分量,使能量注入与姿态调整在数学上正交,避免执行器饱和冲突。
- 无增益LP求解:采用基于模型误差率的单CLF约束构建线性规划,无需调节稳定反馈增益,降低了弱电机系统的参数整定难度。
- 硬件实测验证:在物理样机上实现沿两种非线性正则模态的稳定起摆,证实该分配策略优于传统求和截断与优先级稳定化方案。
工程与产业观察
该研究为低成本、轻量化或电池受限的具身智能本体提供了关键控制理论支撑。通过将欠驱动劣势转化为顺应自然模态的优势,证明了在极低扭矩冗余下仍可实现复杂动态机动。这对优化人形机器人关节选型、降低峰值功率需求及提升能效比具有直接工程参考价值,拓展了弱执行器系统的作业边界。
英文摘要 (Abstract)
Robots with weak motors must ride their natural dynamics rather than fight them. We swing up a direct-drive planar two-link robot, whose motors deliver only about 6,% of its shoulder gravity torque, along its nonlinear normal modes, two-dimensional invariant manifolds consisting of periodic orbits. On a non-strict mode, injecting energy necessarily moves the state off the manifold, so pumping and stabilization compete for the same bounded torque. We split the input torque into a power-neutral steering component and a scalar pumping input, the only component that changes the energy. The allocation then becomes a linear program in two variables: maximize pumping subject to the torque limits and one control-Lyapunov constraint. The constraint uses the model-based rate of the error, so no stabilizing feedback gain is needed. Experiments in hardware show swing-ups along both modes and compare the allocation with summing-and-clipping and with prioritized stabilization.
作者:Arne Sachtler, Manuel Keppler, Florian Loeffl, Alin Albu-Sch"affer
外部来源
本页事实对应的公开页面,以原文为准。(点击将离开本站)