论文arXiv 2611.235753 天前
LuxTac开源3.5mm柔性光学触觉阵列:单税元三轴力感知助力插孔任务
本文由 AI 根据公开内容整理,可能有误,请以原文为准:LuxTac: A Flexible, Scalable, and Open-Source Optical Taxel Array with Distributed Three-Axis Force Sensing for Tactile Robot Learning(arXiv 2611.23575)
核心内容
针对现有压阻传感器无法感知剪切力、相机式触觉传感器体积过大难以覆盖夹爪的痛点,研究团队发布LuxTac开源光学触觉阵列。该传感器厚度仅3.5mm,基于现成组件构建,通过数字RGBC光转数字转换器配合透光硅胶与遮光膜,利用LED背散射光强随局部压陷深度单调变化的原理实现传感。作为首个在单个税元级别解析剪切力的光学阵列,其提供普通法向感知与彩色壁剪切感知两种可互换凝胶墨盒,无需相机或磁铁即可编码三轴力信息。
经CNC压头与六维力矩传感器标定,法向墨盒在104mN至5.8N范围内线性度R²达0.999,重复性2.0%,迟滞5.9%。剪切墨盒下单税元三轴力估计R²分别为0.92/0.93/0.94,剪切方向中位误差仅4.8度。在具身智能验证中,将LuxTac压力读数接入Action Chunking Transformer策略,其peg-in-hole任务成功率较纯视觉基线显著提升。项目已在luxtac.github.io开源硬件设计、驱动代码及演示视频,为低成本高分辨率触觉学习提供标准化基准。
关键看点
- 超薄柔性架构:厚度仅3.5mm,采用RGBC光转数字转换器与硅胶层堆叠,支持大面积 tiled 覆盖夹爪表面
- 单税元剪切感知:首创彩色壁凝胶墨盒机制,无需相机即可在单个税元级编码三轴力,剪切方向中位误差4.8度
- 高精度力传感:法向力104mN-5.8N区间线性度R²=0.999,重复性2.0%,归一化后税元间差异6-10%
- 策略性能增益:集成LuxTac数据的ACT策略在peg-in-hole任务中成功率显著超越纯视觉基线,验证触觉对精密操作价值
工程与产业观察
LuxTac以3.5mm厚度和纯光电方案突破了光学触觉传感器体积与剪切感知的矛盾,为具身智能提供了可大规模部署的低成本三轴触觉硬件基准。其开源特性与ACT策略的实证增益,直接降低了触觉强化学习与模仿学习的数据采集门槛,加速了从实验室触觉算法到工业精密装配场景的工程化迁移。
英文摘要 (Abstract)
Low-cost tactile arrays have made touch a practical input for robot learning, but piezoresistive designs sense only pressure, while camera-based sensors that also resolve shear are too bulky to tile over a gripper. To solve this problem, we present LuxTac, a flexible, scalable optical taxel array, about 3.5 mm thick and built from off-the-shelf parts. Each taxel is a digital RGBC light-to-digital converter under a translucent white silicone layer capped by an opaque black film, so the back-scattered LED light falls monotonically with local indentation depth. The same board accepts two interchangeable gel cartridges: a plain one for normal sensing, and one with colored walls that encodes the local shear in the color of the returned light, with no camera, magnets, or bump overlay, making LuxTac, to our knowledge, the first optical taxel array to resolve shear at individual taxels. Characterized with an automated CNC indenter and a six-axis force/torque sensor, the normal cartridge responds linearly to force ($R^2$ = 0.999) from 104 mN to at least 5.8 N, with 2.0% repeatability, 5.9% hysteresis, and a taxel-to-taxel variation of 6-10% after normalization. With the shear cartridge, per-taxel models estimate the three-axis force at every taxel; across three indenter shapes and nine held-out sessions, the summed estimates reach $R^2$ = 0.96/0.96/0.92 in x/y/z, each taxel's estimate 0.92/0.93/0.94, and the median shear-direction error is 4.8 degrees. Adding LuxTac pressure readings to an Action Chunking Transformer policy substantially improves peg-in-hole success over a vision-only baseline. Design files, code, and videos are available at https://luxtac.github.io.
作者:Md Rakibul Islam Prince, John Pelan, Zhiyuan Zhang, Adyaa Khera, Katherine Pesetski, Adeesh Desai, Akimizu Sugiyama, Minwoo Ki, Benjamin Alan Capelle, Temitope Ibrahim Amosa, Zijie Xu, Yihan Huang, Ta…
外部来源
本页事实对应的公开页面,以原文为准。(点击将离开本站)