论文arXiv 2611.149189 天前
DIVAL算法解决非完整约束机器人初始航向失配与避障难题
本文由 AI 根据公开内容整理,可能有误,请以原文为准:DIVAL: Diffeomorphic Vector-Field Alignment for Nonholonomic Motion Planning(arXiv 2611.14918)
核心内容
传统矢量场运动规划器因无法瞬时响应,常因机器人初始航向与场方向失配引发碰撞。arXiv论文提出DIVAL(微分同胚矢量场对齐)方法,通过对工作空间施加微分同胚变形重塑标称矢量场,使其在起点与机器人航向一致,并在变形区外保持原场特性。数值仿真显示,相比原始基线,DIVAL在所有测试用例中均实现无碰撞收敛并消除控制不连续性;地面车辆硬件实验进一步验证了其在真实扰动及多目标条件下的鲁棒性。
技术核心在于利用微分同胚映射对矢量场进行局部几何重塑,而非修改控制器或路径本身。该方法保证重塑后的矢量场在初始位置严格对齐机器人朝向,同时在远离起点的区域渐近回归标称场,从而继承了原场的避障、目标收敛及平滑控制属性。这种“场-机”对齐机制从根本上消除了非完整约束系统启动阶段的跟踪误差,为移动机器人底层导航提供了兼顾安全性与动力学可行性的解析解方案。
关键看点
- 核心机制:应用微分同胚变形局部重塑标称矢量场,强制初始点场方向与机器人航向重合,消除启动阶段跟踪误差
- 性能验证:数值仿真对比显示,DIVAL在所有测试中实现无碰撞收敛,彻底解决传统方法因航向失配导致的控制不连续问题
- 实车鲁棒性:地面移动机器人硬件实验表明,在真实环境扰动及不同初始条件下,算法仍能保持稳定无碰撞的目标趋近能力
- 理论保障:局部形变设计确保重塑场在变形区外与原场一致,完整保留标称矢量场的避障、收敛性及控制平滑度等关键属性
工程与产业观察
DIVAL为非完整约束移动机器人提供了无需复杂重规划的航向对齐范式。其通过几何变换而非控制补偿解决初始失配,降低了底层导航对高频反馈的依赖。该思路对仓储AGV、无人车等受限系统的矢量场导航具有直接工程参考价值,尤其适用于狭窄空间或动态障碍物场景下的安全启动与平滑过渡。
英文摘要 (Abstract)
Conventional vector-field-based motion planners for nonholonomic robots consist of two steps: first designing a nominal vector field and then controlling the robot to follow it to approach the target. However, a nonholonomic robot cannot follow the vector field instantaneously and may collide with obstacles, due to the inevitable mismatch between the robot's initial heading and the vector field's direction. This paper proposes a diffeomorphic vector-field alignment (DIVAL) method, which aligns the vector field's direction with the robot's initial heading so the robot can follow the vector field from the start. Specifically, the nominal vector field is locally reshaped by applying a diffeomorphic deformation to the workspace, such that the reshaped vector field has the same direction as the robot's heading at the initial position and coincides with the nominal vector field outside the deformed region. Since DIVAL eliminates the initial heading mismatch, the nonholonomic robot can maintain heading alignment with the reshaped vector field throughout the motion. This heading alignment further ensures that the robot preserves the nominal vector field's properties, including obstacle avoidance, convergence to the target, and smooth control signals. Numerical simulations provide vector-field-tracking baselines where the nominal vector fields are reshaped with DIVAL. Compared to the original baselines, the proposed method achieves collision-free convergence in all trials and avoids control discontinuities. Hardware experiments on a ground vehicle further demonstrate collision-free convergence across different targets and initial conditions under real-world disturbances.
作者:Yike Qiao, Xiaodong He, An Zhuo, Zhiyong Sun, Weimin Bao, Zhongkui Li
外部来源
本页事实对应的公开页面,以原文为准。(点击将离开本站)