Skip to content

论文arXiv 2610.0709623 天前

TeleHairing:用于机器人理发的遥操作基线 ​

原文链接:TeleHairing: A Teleoperation Baseline for Robotic Haircutting(arXiv 2610.07096 · 发布日期:2026-10-05)

TeleHairing: A Teleoperation Baseline for Robotic Haircutting

提出TeleHairing闭环遥操作架构,在假人机器人理发评估中量化部署、执行与中断影响。

核心要点 ​

  • 机器人理发需在头部附近控工具,并处理通信、视觉反馈、执行和中断。
  • 方法构建闭环遥操作架构,支持本地、中继和远程部署条件下的假人理发评估。
  • 日志显示远程延迟主要增加在机器人侧控制端点之前,机器人侧时序各模式相近。
  • 轨迹分析表明远程误差主要由末端撤回段主导,检测丢失后重基准可恢复运动。

验证范围与局限:验证限于假人理发评估,涵盖本地、中继和远程部署及检测丢失试验。

英文摘要 (Abstract) ​

Robotic haircutting requires controlled tool motion near the head while simultaneously accounting for communication, visual feedback, tool actuation, and interruption handling. Existing studies still lack an operator-in-the-loop reference for analyzing these coupled behaviors before human trials or stronger autonomy. This paper presents TeleHairing, a closed-loop teleoperation architecture for mannequin-based robotic haircutting evaluation under local, relay, and remote deployment conditions. Logged timing shows that the main remote latency increase occurs before the robot-side control endpoint: overall timing reached 190.5~ms in remote mode, while robot-side command queue, control processing, and control-to-robot timing remained similar across modes. Trajectory analysis shows that the larger remote command-following error was dominated by the terminal withdrawal segment rather than accumulated uniformly over the path; excluding this segment reduced remote root-mean-square error (RMSE) from 45.1 mm to 9.6 mm. Detection-loss trials further show that rebase events resumed motion without a large target jump under the tested condition. These results clarify how deployment, execution, and interruption affect the robotic haircutting teleoperation loop, providing a quantitative reference for future autonomy, safety, and user-facing studies.

作者:Zhendai Huang, Aleksi Vilkki, Jianan Huang, Bolin Liao, Chunbo Luo, Leopoldo Angrisani, Shuai Li

来源

本页事实对应的公开页面,以原文为准。

  1. arXiv 2610.07096:TeleHairing: A Teleoperation Baseline for Robotic Haircutting访问 2026-10-21