# UR10e标定失败报Reconnect called on socket not in LostCo。

> 原文链接：https://robotics.hellobike.com/pitfalls/2026-11-16-universal-robots-ros2-driver-2068
> 频道：pitfalls | 更新日期：2026-11-16 | 标签：auto, github-issue, universal_robots_ros2_driver
> 核心摘要：UR10e在ROS2 Jazzy下执行标定报错连接异常，系驱动Bug所致，升级ur_robot_driver至3.10.0即可解决。

# UR10e标定失败报Reconnect called on socket not in LostCo。

::: v-pre
> 本文由 AI 根据公开内容整理，可能有误，请以原文为准：[Failed to establish connection with the robot during calibration procedure](https://github.com/UniversalRobots/Universal_Robots_ROS2_Driver/issues/2068)（GitHub UniversalRobots/Universal_Robots_ROS2_Driver #2068）

**状态**：已解决

## 问题

UR10e通过Docker运行ROS2 Jazzy驱动进行标定时失败，日志报错`Reconnect called on a socket that is not in LostConnection state`及`Stream is invalid`，提示64秒后重连。但正常启动`ur_control.launch.py`可建立连接并控制运动，仅标定流程触发该连接异常。

## 环境

机型UR10e，Polyscope 10.13，Ubuntu主机经以太网交换机连接控制箱，Docker容器内运行ROS2 Jazzy版ur_robot_driver（版本低于3.10.0）。

## 解决办法

1. 确认当前ur_robot_driver与ur_client_library版本低于3.10.0。
2. 更新软件源或从源码构建，将ur_robot_driver及ur_client_library升级至3.10.0及以上版本（该版本已合入PR #1981修复此标定连接Bug）。
3. 重启Docker容器中的ROS2驱动节点，重新执行标定程序验证连接恢复正常。

讨论原作者：@MadBot97 等，版权归原作者所有。
:::

## 原始参考来源 (Sources)

- [GitHub UniversalRobots/Universal_Robots_ROS2_Driver #2068：Failed to establish connection with the robot during calibration procedure](https://github.com/UniversalRobots/Universal_Robots_ROS2_Driver/issues/2068)