# OmniFish仿生软体鱼：单驱动器变刚度脊柱实现五种BCF游动模态

> 原文链接：https://robotics.hellobike.com/papers/2026-11-19-2611-24511-945a8f15
> 频道：papers | 更新日期：2026-11-19 | 标签：auto, arxiv
> 核心摘要：研究提出模块化软体机器人OmniFish，通过机械阻塞调节分段脊柱刚度，仅用单根腱绳驱动即可切换五种BCF游动模式。Ostraciiform构型下直线速度达8.14cm/s，运输成本低至2.42，验证了变刚度架构在仿生水下推进中的多模态生成能力。

# OmniFish仿生软体鱼：单驱动器变刚度脊柱实现五种BCF游动模态

::: v-pre
> 本文由 AI 根据公开内容整理，可能有误，请以原文为准：[OmniFish: A Bioinspired, Modular, Reconfigurable Soft Robotic Fish Enabling Multi-Modal Swimming](https://arxiv.org/abs/2611.24511)（arXiv 2611.24511）

## 核心内容

针对现有仿生机器鱼难以在单一平台复现多种身体/尾鳍（BCF）游动模态的痛点，研究团队推出OmniFish软体机器人。该设计融合多物种形态学平均分析与模块化重构理念，通过实验验证了其在Anguilliform、Subcarangiform、Carangiform、Thunniform及Ostraciiform五种典型BCF模式下的运动性能，其中Ostraciiform构型在1.5Hz摆尾频率下实现8.14cm/s最高直线速度与2.42最低运输成本。

技术核心在于采用腱绳驱动的柔性分段脊柱结构，利用渐进式机械阻塞（Mechanical Jamming）机制动态调节有效刚度。通过选择性约束特定体节，系统可将形变从全身波动平滑切换为后躯弯曲或局部尾部振荡，从而仅凭单个驱动器模拟不同鱼类的生物力学特征。该方案经尾鳍推力表征、数值阻力仿真及运动学分析验证，证明了简单机械变刚度架构在多模态软体水下机器人开发中的通用性。

## 关键看点

- **变刚度驱动机制**：采用腱绳驱动柔性分段脊柱，利用渐进式机械阻塞原理动态调节刚度，单驱动器即可实现全身波动到局部尾摆的形变切换
- **五模态游动验证**：单一平台支持Anguilliform至Ostraciiform五种BCF模式，Ostraciiform构型在1.5Hz下直线速度达8.14cm/s
- **能效与动力学特性**：Ostraciiform模式运输成本低至2.42，运动学分析确认了变形模式从分布式向局部化的精确迁移
- **仿生设计方法论**：基于代表性鱼类形态测量学平均法指导结构设计，结合数值阻力仿真与推力表征完成参数优化

## 工程与产业观察

OmniFish证明了机械变刚度优于多电机阵列在实现水生多模态运动时的系统简洁性。其基于机械阻塞的刚度可调脊柱为软体机器人提供了低复杂度、高鲁棒性的本体设计范式，对水下具身智能体的形态自适应与能效优化具有重要工程参考价值。

## 英文摘要 (Abstract)

In this work, we introduce OmniFish, a bioinspired modular soft robotic fish designed to emulate the full spectrum of body and/or caudal fin (BCF) locomotion modes within a single robotic platform. The design combines morphology averaging across representative fish species with a tendon-driven compliant segmented spine whose effective stiffness can be reconfigured through progressive mechanical jamming. By selectively constraining body segments, OmniFish shifts deformation from whole-body undulation to posterior body bending and localized tail oscillation, enabling bioinspired Anguilliform, Subcarangiform, Carangiform, Thunniform, and Ostraciiform swimming using a single tendon-driven actuator. The design was guided by morphometric analysis and evaluated through caudal-fin thrust characterization, numerical body-drag simulations, kinematic analysis, and swimming performance experiments. Kinematic analysis confirmed the intended robot transition from distributed body undulation to localized tail oscillation. Swimming experiments demonstrated distinct mode-dependent performance, with the Ostraciiform configuration achieving the highest straight-line velocity of 8.14 cm/s and the lowest cost of transport of 2.42 at 1.5 tail beats/s. These proof-of-concept results show that a mechanically simple stiffness-reconfigurable architecture can generate distinct BCF swimming modes and provide a versatile strategy for developing multimodal soft robotic fish.

作者：Mathias Jensen, Saravana Prashanth Murali Babu
:::

## 原始参考来源 (Sources)

- [arXiv 2611.24511：OmniFish: A Bioinspired, Modular, Reconfigurable Soft Robotic Fish Enabling Multi-Modal Swimming](https://arxiv.org/abs/2611.24511)