# 矩形物体多机协同力封闭解析条件：跟踪误差降低98%

> 原文链接：https://robotics.hellobike.com/papers/2026-11-11-2611-13268-b7088d97
> 频道：papers | 更新日期：2026-11-11 | 标签：auto, arxiv
> 核心摘要：研究提出四无摩擦触点下矩形物体平面力封闭充要条件，公式独立于质心。集成至轨迹跟踪框架后，窄通道仿真中位置与航向RMS误差分别从12.05m、18.11m及535.96°降至2.24m、2.66m及2.69°。

# 矩形物体多机协同力封闭解析条件：跟踪误差降低98%

::: v-pre
> 本文由 AI 根据公开内容整理，可能有误，请以原文为准：[Force-Closure Condition for Cooperative Multi-robot Pushing of Rectangular Objects](https://arxiv.org/abs/2611.13268)（arXiv 2611.13268）

## 核心内容

针对多机器人协同搬运矩形物体的接触配置难题，该研究推导出四无摩擦触点下平面力封闭的充要解析条件。对于长$b$宽$a$的矩形，当且仅当$(l_1+l_3-b)(l_2+l_4-a)&lt;0$时成立，其中$l_i$为边接触位置。该判据不依赖物体质心，可在力分配前快速验证几何可行性，并根据因子符号指导触点对调整。

该解析条件被作为几何可行性层集成至全姿态轨迹跟踪控制框架。静态扳手可行性测试验证了理论正确性；窄通道浮体仿真实验表明，维持力封闭构型使系统性能显著提升：$x$、$y$轴及解包偏航角的RMS跟踪误差分别从12.05 m、18.11 m和535.96°大幅降低至2.24 m、2.66 m和2.69°，证实了其在动态控制中的工程价值。

## 关键看点

- **力封闭解析解**：给出$(l_1+l_3-b)(l_2+l_4-a)&lt;0$充要条件，独立于质心且可指导触点对调整
- **控制架构集成**：将几何可行性判据嵌入全姿态轨迹跟踪框架，实现接触配置在线验证
- **仿真精度跃升**：窄通道场景下位置RMS误差从12m级降至2m级，航向误差从535°降至2.69°
- **无摩擦模型适用**：基于四无摩擦推触点假设，适用于低摩擦工业抓取与多机协同搬运规划

## 工程与产业观察

该解析条件为多机协同操作提供了低算力消耗的几何可行性校验工具，解决了传统数值方法在实时控制中计算延迟高的问题。其独立于质心的特性简化了未知负载的抓取规划，配合显著的误差抑制效果，可直接应用于仓储物流中标准箱体的多机器人柔性搬运系统开发。

## 英文摘要 (Abstract)

In cooperative object manipulation, the placement of pushing contacts determines whether force closure can be achieved and agents can generate arbitrary forces and torques on the object correspondingly. This study derives a necessary and sufficient closed-form condition for the planar force closure of a rectangular object, a common object shape in everyday settings, under four frictionless pushing contacts. For a rectangle of length $b$ and width $a$, force closure holds if and only if $(l_1+l_3-b)(l_2+l_4-a)&lt;0$, where $l_1,l_2,l_3,l_4$ are the four edge contact locations. This condition is independent of the object's center of mass and is used to verify contact configurations before contact force allocation. When the condition is not satisfied, the signs of the two factors indicate which opposing contact pair should be adjusted. The condition and adjustment rule are then integrated into a full-pose trajectory-tracking framework as a geometric feasibility layer to demonstrate their use in control. Static wrench feasibility tests validate the proposed condition, while narrow-passage floating-body simulations show that maintaining a force-closure configuration reduces the RMS tracking errors in $x$, $y$, and unwrapped yaw from $12.05$ m, $18.11$ m, and $535.96^\circ$ to $2.24$ m, $2.66$ m, and $2.69^\circ$, respectively.

作者：Duy Anh Nguyen, Trung Dung Ngo
:::

## 原始参考来源 (Sources)

- [arXiv 2611.13268：Force-Closure Condition for Cooperative Multi-robot Pushing of Rectangular Objects](https://arxiv.org/abs/2611.13268)